2230757 Scania Cab Corner | Durability-Optimized Design
2230757 Scania Cab Corner | Durability-Optimized Design
Verfügbarkeit für Abholungen konnte nicht geladen werden
2230757 Scania Cab Corner
Designed for SCANIA L-, P-, G-, R-, and S-Series trucks (2016-2021), the 2230757 Scania Cab Corner (2230757, 2230756) features laser-cut steel construction with zinc-nickel anti-corrosion coating. The three-dimensional press-forming process creates structural reinforcement ribs that improve cab integrity by 25% compared to standard panels. Precision alignment holes maintain ±0.8mm tolerance for seamless installation with original mounting hardware. The electrostatically applied primer layer ensures optimal paint adhesion, while the pre-installed rubber gaskets (70 Shore hardness) provide watertight sealing. Both left and right configurations use identical material thickness (1.5mm CR4 steel) and surface treatment processes. The embossed part numbers near the lower edge allow quick identification without removing the panel.
Structural Compatibility
Engineered to match SCANIA's modular cab design, these cab corners integrate with the original roof panel, windscreen frame, and door pillars. The curved edge profile replicates factory specifications within 1.2mm radius accuracy. Twenty-two mounting points per panel distribute road vibration loads across the cab substructure. Compatible with both day cabs and sleeper configurations, the design accommodates existing antenna mounts and clearance light wiring harnesses. The zinc-rich coating (8µm minimum) provides 10-year corrosion protection in European road conditions. All edges undergo hemming treatment to prevent paint chipping, with laser-welded brackets maintaining original accessory mounting positions. The OE numbers 2230757 (right) and 2230756 (left) correspond to SCANIA's electronic parts catalog for 2016+ models.
Manufacturing Specifications
| Component | Specification |
|---|---|
| Base Material | CR4 Cold-Rolled Steel |
| Surface Treatment | Zinc-Nickel Electroplating |
Produced using 2000-ton hydraulic presses, each panel undergoes 12-stage quality checks including 3D laser scanning for dimensional verification. The spot-welded reinforcement patches match original equipment thickness profiles within 0.2mm variance. Pre-drilled holes maintain M6x1.0 thread specifications for factory-style bolt alignment. The cathodic electrocoating process ensures complete coverage in recessed areas, while the matte black finish reduces visible scratches during installation. Both OE references (2230757 and 2230756) share identical material certifications and production batch traceability codes. Each unit ships with ISO/TS 16949 compliance documentation.
Design Features
- ▶ Vibration-damped structure
- ▶ Hem-sealed edges
- ▶ Corrosion-resistant layers
Quality Assurance
- ▶ 12-stage inspection process
- ▶ 3D surface mapping
- ▶ Thickness verification
Compatible with SCANIA L-, P-, G-, R-, and S-Series trucks manufactured between 2016-2021 using OE numbers 2230757 and 2230756
2230757 Scania Cab Corner | Durability-Optimized Design
